I think the AI could use better controls. Such as a setting for heater= heat only and fans=RH only.
In my case, no dehumidifier so if outside is humid so is grow area but it’s a dry area most of the time and fans control easy as plants are the humidifier in the space.
I think my quest for a stable environment is over. This started as me trying to get my lights out temperature and humidity under control. After stabilizing my lights out environment I turned my attention to lights on.
Shop AI grow cameras built for tents and indoor gardens. Capture UHD footage, monitor plant health anywhere with the AC Infinity app, and get actionable growth insights.
Shop AI grow cameras built for tents and indoor gardens. Capture UHD footage, monitor plant health anywhere with the AC Infinity app, and get actionable growth insights.
Checked the grow this morning and temps were above 90°F and the lights were still on. Checked everything and the controller and relay plugs had to be reset. The lights were on for 40 minutes longer than scheduled. So either 3 relay plugs got stuck in ON position simultaneously, or the controller or wireless UIS fobs are faulty.
Yeah with everything linked, one issue and it all goes to shit. The water schedule was also locked up so plants were not fed all night. Seems Wedding Cake, smallest plant, was mostly effected with some yellowing and droopy leaf ends.
I did as Ac Infinity recommended they said was due to corrupt app data. Delete the device in app, delete app, factory reset controller and start over as if new.
Ordered Hydrone 7 dehumidifier from AC Infinity which is supposed to ship March 31st. Plan to move lights and water timing to relay controller and give AI controller full control of temperature and humidity using oil radiant heater for heat, 8000 BTU AC for cooling and AC Infinity humidifier with new dehumidifier. Limit app access to single device (phone only vs ipads+) and monitor closely. Will deploy during drying process if able otherwise this will all be used for next crop.
Ordered Hydrone 7 dehumidifier from AC Infinity which is supposed to ship March 31st. Plan to move lights and water timing to relay controller and give AI controller full control of temperature and humidity using oil radiant heater for heat, 8000 BTU AC for cooling and AC Infinity humidifier with new dehumidifier. Limit app access to single device (phone only vs ipads+) and monitor closely. Will deploy during drying process if able otherwise this will all be used for next crop.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.