My AC Infinity Jones

Forgive me if you know all this already but others may not. The controller uses two sensor ports and 8 device ports and they all have the same connection but sensors cannot be used as devices and vice versa. Several types of sensors and devices available.
It has two external sensor ports and one built-in sensor. If you plug in a temp/rh sensor in each port it will no longer display built-in sensor readings. I think it defaults to sensor port 1 being "outside" conditions and sensor port 2 as "inside" conditions. If you plug a water condition (Ph/EC) sensor in 1 port and Temp/RH in the other sensor port the built-in sensor readings are available again as "outside" conditions.
 
I am not able to move controller outside the room, so for a while I used two external sensors with one outside the room and showing "outside" conditions. The AI mode requires it. Once I added the PH/EC sensor, I was not able to select built-in sensor as "inside" conditions and control. Yes it was annoying upon discovery as it seems so intuitive.
 
Do I need a intelligent camera to tell me what I can see with my own eyes? No. Still want it!

5055.webp
 
Back
Top